The application will not take more than 5 minutes of your day. Even in this short amount of time your skin is perfectly cleaned and all the nutrients are absorbed deeply. All that is achieved through the method of galvanic ionisation.
Hypoallergenic peeling and sebum removal works on the principle of ultrasound vibrations which go deep into the skin without damaging or irritating it. Removes all impurities, dead skin cells and sebum from pores so your skin can breathe again.
During galvanic ionisation application directly on the skin the nutrients from a facial or face serums go deep into the skin. The micro-current affects the skin and perfectly lightens it.
Galvanized skin is irradiated by the G-Blue light (470 nm) and by the G-Red light (624 nm). Thanks to that your tired skin will be revitalised and cleansed.
G-Blue light helps the absorption of cosmetic serums or facials deep into the skin. It also helps remove acne, calm down inflammation and it ensures a healthy skin without any imperfections.
G-Red light effectively prevents ageing. Supports the creation of collagen, smooths out wrinkles and ensures the elasticity of your skin. Helps you achieve brighter and younger skin without wrinkles.
Hypoallergenic golden massage maximises the effectivity of both the galvanic ionisation and light therapy. Calms and lightens the skin as well as supports lifting of your skin.
From peeling through removal of skin imperfections and skin pigmentation to lifting. You can now enjoy exceptional care whose effects only begin in aesthetics.
How it works
Start with peeling
Peeling is the most vital part of the process. Up to 30.000 vibrations per second remove old skin. Meanwhile it cleans pores from sebum, quickens the healing process of acne and prevents its creation.
Clean your skin like you normally would (micellar water, herbal tonic, …)
Choose peeler function (turn the peeler on with a long press of the button. Then press the button briefly and it will be set for the peeling function).
Apply RECLAR peeler on moisturised skin and move it as shown in the pictures. Do that for all the skin. The process should take about 5 minutes.
Moisturise your skin with mineral or regular water if it’s getting too dry. The peeler uses spattering and so its effectivity might lower on dry skin
The peeler can initially be used once or twice a day. When your skin is cleaned beautifully and depending on your type of skin once every week or every 2 weeks is usually enough.
Your skin might be dry after the peeling. We recommend applying a facial, a facial serum or moisturising cream.
Apply G-Blue light
The next step is G-Blue light therapy. It helps mitigate the effects of skin imperfections and inflammations but also prevents acne and minimalizes its appearance. Galvanic massage works simultaneously with G-Blue light function which helps absorb nutrients from a facial or a serum.
Apply a facial or a serum on clean skin
Switch the peeler on and press the button twice briefly for G-Blue light function
Move the blade across your face as shown in the pictures for approximately 5 minutes
Hold the peeler at the gold edges while in use. Those are electrodes activating the G-Blue light. The light should switch on after contact with skin.
You might feel a light stinging after contact with skin. That is caused by ionizing and is absolutely harmless for body and skin.
G-Blue light can be used in combination with RECLAR facial. Apply the facial on your skin and use G-Blue light afterwards. It can also be combined with other cosmetics which you are used to.
You can use G-Blue light every day. After a few weeks of such usage twice or three times per week should usually be enough depending on the type of your skin..
Use G-Red light
The last step is G-Red light. Ultrasound massage in combination with galvanisation revitalizes the skin. G-Red light smooths out wrinkles, closes pores and supports skin elasticity.
Apply hydrating / nourishing cream on face
Switch the peeler on and press the button 3 times to access G-Red light
Move the peeler as shown in the pictures for about 5 minutes
Don’t forget to hold the peeler by the gold electrodes on the sides. You can tell the peeler is working correctly by the red light which lights up after contact with skin.
You can use G-Red light every day. After a few weeks of this usage twice or three times per week should usually be enough depending on the type of your skin.
Galvanisation and golden therapy
When using both light functions your skin is affected by positive and negative ions thanks to the galvanic effect. That results in better absorption of cosmetic products into the skin. Skin gains resistance, is cleansed and pores are closed.
Blade made of 99.9% gold ensures better blood circulation, gets rid of toxins and thus supports other functions of the peeler.
How often can I use peeler RECLAR?
Initially we recommend once every 2 days for the peeling. After a month once a week is enough and ultimately once every 2 weeks depending on your skin type. G-Blue and G-Red light can be used daily. Twice or 3 times a week is usually enough after a month but again, it depends on your skin type.
Can I use all the functions at once?
Yes, it is possible to combine all three functions however you please. We recommend starting with peeling and then move on to G-Blue and G-Red light as is described in the tab “How it works” Each of the features can be applied separately as well depending on you and your skin’s needs.
How long should 1 cleansing take?
It all depends on whether you are using just 1 function or whether you are combining more of them. Try not to exceed 15 minutes to avoid skin irritation. We recommend using each of the functions for 5 minutes. You can start on 3-4 minutes and gradually progress if you have sensitive skin.
When should which feature be used?
Use peeling after your skin is cleaned and moisturised. After the application of a facial use G-Blue light which supports absorption and prevents inflammation. Then you can apply your cream and use G-Red Light which closes pores and wraps up the whole process. More detailed directions can be found in the tab “How it works”
Should I be using facials or other cosmetics every time?
It is necessary to have your skin moisturised by water, mineral water, cream, a facial or a serum.
Is it a problem if I pass the same place twice within the same function?
No, it absolutely isn’t. Each function can take up to 5 minutes so it is completely okay to pass the same place several times.
How long until I see results?
First effects should be visible after about 3 weeks of using the peeler. After 2 months your skin will look considerably better and clearer.
Can I use the peeler on the sensitive skin around eyes where I have wrinkles?
G-Red light which smooths out wrinkles is suitable to use around the eyes as well. We recommend to close your eyes so that the light wouldn’t shine straight in them. The other functions are not necessary in this area but will not harm the skin in any way.
Should I use G-Blue light even though I don’t have acne?
G-Blue light enhances the skin overall and prevents inflammation. It can also help with acne but is suitable for everyone. It improves absorption of facials into the skin.
Is it okay to combine G-Red and G-Blue light in succession?
Yes, all the functions can be used in succession. We recommend starting with G-Blue light to better absorb facial and finishing with G-Red light to close your pores. Detailed instructions can be found in the tab “How it works”
How much pressure should I apply during peeling?
The peeler is developed so that it cleans your skin deeply as it is so there’s no need to apply any extra pressure. Your hand is the medium between the peeler and your skin. Excessive pressure might result in unnecessary irritation if your skin.
What creams and serums can I use with RECLAR peeler?
You can use any creams, serums or facials you are used to. We recommend RECLAR facial which contains all the substances your skin needs and works perfectly with RECLAR peeler. After the facial it is recommended to support the absorption by G-Blue light.
Power: 28 000 Hz
Size: 170 x 52 x 15, 5 mm
Charging time: 60min.
Use time – 30min. (after full charge)
Warranty: 2 years
Made in South Korea.
USB charging cord (socket charger is not contained in the package but you can use your phone’s or a USB port in a computer).
Waterproof travel case
Certificates and appraisals
Certificates and tests of the hypoallergenic blade RECLAR